Enter your desired concentration factors. This will update the Stock Concentration values and adjust the aliquot chart below. After completing this form, print or save your results for an easy reference.  
   
               
  Macro and Micronutrients Needed    
  Stock solution Component Final Conc. (mg/L)  Stock Conc. (mg/L)  Stock Sln. (g/100ml) Concentration Factor  
   
  A Na2.EDTA 37.3    
           
  FeSO4. 7H2O 27.8    
  B (NH4)SO4 134  
  C CoCl2.6H2O 0.025    
           
  KI 0.75    
  D   KNO3 2500  
  E NaH2PO4 130.5    
  ZnSO4 · 7H2O 2    
           
     CuSO4. 5H2O 0.025    
     MgSO4 122.09    
  F MnSO4. H2O 10    
  H3BO3 3  
  Na2MoO4. 2H2O 0.25    
  G CaCl2 113.240  
               
               
  Vitamins Needed  
  Stock solution Component Final Conc. (mg/L)  Stock Conc.(mg/L)  Stock Sln. (g/100ml) Concentration Factor  
   
  H Thiamine 10    
  Nicotinic Acid 1    
           
  Myo-Inositol 100    
  Pyridoxine 1    
  pH before autoclaving 5.8        
               
               
               
  Gamborg Media Solution Planner    
               
  Desired total preparation volume mL    
Enter your desired total preparation volume. Use the chart below to determine appropriate aliquots
of each component to use. Follow the protocol to add each stock solution in the appropriae order.
   
               
  Macro and Micronutrients Needed    
  Stock solution Component Stock Conc. (mg/L) Aliquot (ml) Final Conc. (mg/L)    
     
  A Na2.EDTA 37.3    
  FeSO4. 7H2O 27.8    
  B (NH4)SO4 134    
  C CoCl2.6H2O 0.025    
  KI 0.75    
  D KNO3   2500    
  E NaH2PO4 130.5    
  ZnSO4 · 7H2O 2    
  CuSO4. 5H2O 0.025    
  MgSO4 122.09    
  F MnSO4. H2O 10    
  H3BO3 3    
  Na2MoO4. 2H2O 0.25    
  G CaCl2 113.240    
               
  Vitamins Needed    
  Stock solution Component Stock solution concentration (mg/L) Aliquot (ml) Final Concentration (mg/L)    
     
     
  H Thiamine 10    
  Nicotinic Acid 1    
           
  Myo-Inositol 100    
  Pyridoxine 1    
  pH before autoclaving 5.8