Calculation model LogoEco Hybrid FL        
INPUT
Select a FlexTherm model
Remarks
  Enter the DHW Flow FDW = L/min Between 0,1 and 20
Specify a Setpoint for the DHW temperature SP = °C Between 45 and 58
  Enter a primary flow temperature TDH = °C Between 35 and 55
Temperature difference between District Heating and Tap water from heat exchanger
°C Preferable 5
Select whether Electrical additional heating is ON or OFF 
Temperature to where to calculate:
°C
The maximum of (TDH-5°C) and temperature to which it is calculated
°C
Results